Installation of the Lightswing

A flexible hanging system for your pendant lights is of little use to you if it is a lot of work to install this system. In the development of the Lightswing, we have therefore ensured that installation is almost as simple as changing a light bulb. On this page, you can read briefly about this or watch a video.

 

In 3 simple steps

1

Remove the current light

If you already have a light hanging on the ceiling, the first step is to remove it. For this purpose, turn off the power to the connecting wires. You install the Lightswing to the junction box on your ceiling, or with the construction ring if you have a different location in mind. It can also be connected directly to an electricity cable coming from your ceiling.

2

Install the Lightswing

Then drill 4 holes in the ceiling. With the drilling template, you simply mark where the holes should be. Then it is time to connect the electricity cable to the supplied terminal block. Then you screw the Lightswing to the ceiling and check that the Lightswing can rotate and slide freely.

3

Attaching the light to the Quick Release

Now it is time to attach the lights to the Quick Release. For this purpose, you strip a part of the cord, that you then attach again in the terminal block of the quick release system. And you’re done! Click the light with the quick release system into the Lightswing, switch the power back on and enjoy maximum flexibility from your pendant lights.

You attach a Lightswing in an instant.  

In the digital manual of the Lightswing, you can see exactly what is in the packet, which tools you need and how you install the Lightswing.

Installation experiences from others

There were already more than 25.000 satisfied customers before you! 

Order your Lightswing

No Lightswing at home yet? Order a Lightswing quickly and easily via our website!