The Lightswing® is delivered pre-assembled, and you can install it yourself to the ceiling. However, it is important to follow...
Yes, it is necessary to drill 4 holes in your ceiling to mount the Lightswing®. The round base plate of...
Take the Quick Release out of the Lightswing® and use a screwdriver to loosen one of the cable clamps and...
The included leveling feet can be used to adjust the Lightswing® straight along the ceiling and to provide additional support....
Yes, it is necessary to turn off the power before installing the Lightswing®. This is for safety reasons, as working...
First, check if the cover caps are properly secured. When attaching them, you should hear a click indicating that they...
Your Lightswing® has an anti-rotation safety feature. This safety feature ensures that the Lightswing® locks after (approximately) two rotations of...
Snap the cover caps onto the base plate of the Lightswing® so that the screws that are used to attach...
The Quick Release is a coupling device that allows you to attach the pendant lamp to the Lightswing®. The Lightswing®...
It is especially important to check whether the screw heads fit precisely into the recess of the Lightswing® and do...
For the installation of the Lightswing®, you will need the following tools: a drill, screwdriver, power screwdriver, and wire stripper....
The long transparent bolt is necessary when you attach the Lightswing® not directly to the ceiling, but to the mounting...
With the help of the mounting ring, you can place the Lightswing® in any desired location. There are several reasons...
Inside every Lightswing® package, you will find a QR code on the inside of the box. By scanning this QR...
In the mounting ring, there is a recess. Push it out of the mounting ring. Thread your electrical cable through...
